Cass Technology CASTLE S SERIES Instrukcja Użytkownika Pobierz pdf (Strona 20)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

o. PIN Mode

‘ON/OFF’ value. When the PIN Mode is set to ON, the user has to key in the Auto-

PIN to access the door; if it is set to OFF, the user will not be prompted to key in the

Auto-PIN, but the user can swipe his/her card to access the door.

p. Card + PIN Mode

‘ON/OFF’ value. When the Card + PIN Mode is set to ON, the user has to key in the

Card PIN after his/her card is valid. If it is set to OFF, depends on Card + PIN

Mode TimeZone setting, the user will not be prompted to key in the Card PIN, only

swipe a valid card.

q. Master PIN

6 digits of number are required to set the MASTER PIN. This is used to enter the

Programming Mode at the reader when the controller is down. User can use this PIN

number to program the reader. (The programming steps are shown in Chapter 11)

Setting Holidays

Press ‘3’ key to select [3-Holiday] menu from the System Menu.

This menu item sets the Holidays database. There are two types of holidays, Holiday_1

and Holiday_2. Holiday_1 is higher priority than Holiday_2. That’s mean Holiday_1 will

be taken into consideration by the controller rather than Holiday_2.

When user select this menu, controller will prompt the user to choose which type of

holiday they want.

User has to press ‘1’ or ‘2’ to select Holiday_1 or Holiday_2.

After the selecting, the controller will display the first holiday date as in the following: -

MM => month

DD => day

Digits in the ( ) bracket are under focus.

Use the ‘0’ to ‘9’ keys and the ‘ENT’ to enter the month of the holiday followed by the

day. Press the ‘ENT’ key to accept the date and the display will show the next holiday

date.

Continue until all the holidays have been entered. There are total of 30 holiday dates in

each Holiday setting, which can be entered. To clear a holiday, enter ‘00’ for both month

and day entries.

CASS TECHNOLOGY SDN BHD(338857-X) 20

dd/mm DDD hh:mm:ss

Type ? (1/2) [ 1 ]

dd/mm DDD hh:mm:ss

Hol – MM(00) DD[00]

dd/mm DDD hh:mm:ss

Pin Mode [ON]

dd/mm DDD hh:mm:ss

Card + Pin Mode [ON]

dd/mm DDD hh:mm:ss

Master [000000]

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Brak uwag

Cass Technology CASTLE S SERIES Instrukcja Użytkownika Strona 20