Cass Technology CASTLE S SERIES Instrukcja Użytkownika Pobierz pdf (Strona 16)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Digits in the ( ) bracket are under focus.

Proceed in the same way to change Hour and Minute. Once user has completed

changing Minute, the system clock will be updated.

Door Setting

Press ‘2’ key to select [2-Door] menu from System Menu.

This menu item allows user to set the door setting. To set the specified door, user has

to enter the number of door (1-12 for 12s series, 1-16 for 16s series). To set the other

door, user has to press the ‘2’ again at System Menu to enter to Door Setting Mode.

When the user select this menu item, the controller will step through each of the Door

Setting. The key usage under this menu is listed below: -

Key Function

0 – 9 Set the digit

ESC Skip the setting

ENT/D Accept the setting

For ON/OFF value entries, use the ‘0’ key to toggle the value.

a. Lock Release Time

A value of 00-60 is allowed. This value determines the amount of time (in seconds)

that the electric door-lock is activated after a valid user card has been swiped. If the

door is not opened within this time period, the door will be deactivated. The default

value is 05 seconds.

b. Door Open Time

A value of 00-99 is allowed. This value determines the amount of time (in seconds)

that the door takes to close. If the door is left opened for longer than this time

period, the buzzer would sound. The default value is 10 seconds.

c. In Location Code

A value of 00-99 is allowed. This value determines the door In Location Code of the

Door. This setting will be used when the Anti-PassBack Mode at the Parameter

Menu is ON.

CASS TECHNOLOGY SDN BHD(338857-X) 16

dd/mm DDD hh:mm:ss

Hr(09) MIN[54]

dd/mm DDD hh:mm:ss

In Loc Code [ 00 ]

dd/mm DDD hh:mm:ss

Door Open Time [ 10 ]

dd/mm DDD hh:mm:ss

Lock Rel Time [ 05 ]

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Brak uwag

Cass Technology CASTLE S SERIES Instrukcja Użytkownika Strona 16